See what our Experts say about this Rhino Rack Roof Rack

• Does Thule Motion XT Rooftop Cargo Box Fit Rhino Rack Roof Rack
  The Rhino Rack Vortex Crossbars # RRVA137B-2 you referenced measure 3-1/8" wide x 1-3/16" tall. The Thule Motion XT Rooftop Cargo Box # TH629806 will fit crossbars that are up to 3-1/2" wide and 1-11/16" tall so they will work on these bars! If you let me know the year, make and model of your vehicle I can confirm for you which Rhino Rack roof rack will fit and the parts you will need.
  view full answer...
• Roof Rack for 2018 Chevy Equinox without Factory Raised Side Rails
  For your 2018 Chevy Equinox, I recommend the Rhino-Rack RVP Roof Rack for Fixed Mounting Points # RRRVP49. This will use the factory fixed mounting points and will not use the clips that come down into the door frame. It will look like it came from the factory but you will have the T-slots and locks that would not come with a factory roof rack. I've attached the installation details to assist. If you prefer the aftermarket look while still utilizing these mounting locations, then I...
  view full answer...
• Recommended Roof Rack For 1999 Toyota Camry With Naked Roof
  To be honest, the SportRack Semi-Custom Roof Rack, part # SR1005 is one of our less expensive roof racks and does not come with custom brackets made specifically for your 1999 Camry as our other roof racks do. Some of the issues is that because it is a semi-custom fit, the feet do not always fit the contour of the roof. If you are planning on using the roof rack a lot I would definitely go with a custom-fit roof rack to avoid fit issues. We have not had complaints about leaking water, and...
  view full answer...
  
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• What Rear-Loading Kayak Will Work for My Tandem Hobie Kayak that Weighs 99 Pounds?
  I went ahead and called my contact at Rhino-Rack, and they confirmed that the Nautic 581 carrier # RR581 has a maximum weight rating that is the same as the roof rack system that you mount it on. Most of the time, roof racks are rated above 99 pounds. However, if you want to be sure about the weight capacity, I recommend the Yakima BigCatch Kayak Carrier w/ Tie-Downs # Y04091. The BigCatch has an impressive maximum weight capacity of 150 pounds, which is plenty of capacity to accomodate...
  view full answer...
• Recommended Roof Rack and Cargo Carrier for 2013 Toyota Corolla
  For your 2013 Toyota Corolla, I recommend the Rhino-Rack Vortex Aero Crossbars # RRVA118B-2, the 2500 Series Legs # RRRLKVA, and the Custom DK Fit Kit # DK152. This is a confirmed fit for your vehicle. I also recommend the metal lock cores # RRVA-LEC4 for when you use the T-channel mounting for accessories that have that mount that fits in the slot on top of your crossbars instead of wrapping around them. Then for your rooftop cargo carrier, I recommend the Thule Force XT Rooftop Cargo...
  view full answer...
• How to Carry Three Kayaks on the Roof of a 2018 Chevrolet Equinox
  In order to fit three kayaks on the roof of your 2018 Chevrolet Equinox, you will first need a roof rack. In order to recommend one I would need to know if you have a bare roof with fixed mounting points or factory raised side rails. If you have the bare roof with fixed mounting points then I recommend the Rhino-Rack Vortex Aero Crossbar System which is composed of crossbars part # RRVA118B-2, mounting feet part # RRRCL4 , and fit kit part # RRRCP62-BK. If you have factory raised side...
  view full answer...
• Best Roof Rack for a 2021 Subaru Crosstrek to Keep a Low Profile
  It looks like there are some videos online of people removing the roof rails from Subaru Crosstreks, but it's not something I recommend doing. The racks that we have available for the 2021 Subaru Crosstrek are designed with the rails in mind. We don't have any that are made for this vehicle without rails. That having been said, we do have an option that is designed with a low profile in mind. It's the Rhino-Rack Vortex StealthBar, part # JA7973. This set wraps around the rails instead...
  view full answer...
• 2013 Chevy Equinox Rhino-Rack 2500 Square Roof Rack Parts
  Yes, those are the correct parts for your 2013 Chevy Equinox with a bare roof. 46" Vortex Crossbars - # RRVA118B-2 2500 Series Legs - # RRRLKVA Fit Kit - # DK226 Attached is an installation video of this system on a 2013 Equinox for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make additional recommendations!
  view full answer...
  
• RockyMounts TomaHawk Roof Bike Rack for Fat Bikes Compatibility with Rhino-Rack Vortex Aero Bars
  The RockyMounts TomaHawk Roof Bike Rack for Fat Bikes - Wheel Mount - Clamp On - Aluminum # RKY1222 will absolutely fit the Rhino-Rack Vortex Aero Blade Crossbars like # RRVA118B-2 that are 3-1/8" wide x 1-3/16" tall. I do recommend using the lock cores # RKY0332 to secure your bike to the carrier and your carrier to the crossbars.
  view full answer...
• What Extra Straps Can I Use with My 2014 Nissan Versa Note?
  I have a solution for you. The weight of the Rhino-Rack Rooftop Cargo Bag - Waterproof - 7 cu ft - 55" x 19-1/2" x 11-1/2" # RRLB200 is about 6 pounds. As far as the straps, I saw from your previous orders that you ordered Rhino-Rack Vortex Aero crossbars # RRVA118B-2 from us. Usually, the Rhino-Rack Rooftop Cargo Bag is made to attach to the car's factory rail system. If your vehicle has a bare roof, we do not have a way to attach the side straps to your 2014 Nissan Versa Note's doors....
  view full answer...
• Which Roof Rack Will Allow Me To Mount 2 Yakima JayLow Kayak Carriers On My 2016 Honda Fit?
  You can mount 2 sets of the Yakima JayLow Kayak Carrier w/ Tie-Downs - J-Style or Post Style - Folding - 1 or 2 Kayaks # Y04073 on a 46" roof rack, but it will be somewhat of a tight fit. The overall distance from one end of the JayLow to the other end is about 19", so you may have a little bit of the JayLow hanging over the crossbar legs which is fine. Most crossbars, aside from flush crossbars, have a spot (where the towers/legs are at) that you cannot clamp an accessory, but you will...
  view full answer...
• Recommended Cost-Effective Roof Rack for a 2009 Chevrolet Malibu and a 2012 Nissan Maxima
  The SportRack # SR1002 is a Semi-Custom roof rack. It will fit your 2009 Chevrolet Malibu and will work if you are looking for the most cost-effective option out there. If you plan on using the roof rack frequently though I highly recommend going with a custom roof rack for your Malibu. A custom rack is one that uses a fit kit specially designed and tested to fit your roof properly. The most cost-effective option we have in this category is the Inno rack which consists of the Square Crossbars...
  view full answer...
• Roof Rack Capacity for a 2017 Ford Fiesta
  The racks you see have a different weight capacity depending on if your 2017 Ford Fiesta is a 5-door hatchback or 4-door sedan. For example, the Rhino Rack that consists of Aero cross bars # RRVA118B-2, legs # RRRLKVA and fit kit # DK046 have a 110 lb capacity if installed on a '17 Fiesta that is a 5-door hatchback but the same rack has a 165 lb capacity if installed on a '17 Fiesta that is a 4-door Sedan. Choosing what model of Fiesta you have will lead you to the correct rack. I've attached...
  view full answer...
• Roof Rack Recommendation for 2013 Nissan Cube and Buick Verana and Bike Rack, Kayak Carrier and Box
  The closest option for a roof rack that fits both your 2013 Buick Verano and Nissan Cube will be a Rhino Rack Vortex rack that allows you to use the same foot kit between the two part # RRRLKVA but the bar lengths and fit kits are different for each vehicle. The Verano needs the shorter bar length of # RRVA118B-2 and the Cube needs the longer # RRVA137S-2. The Verano needs the fit kit # DK340 and the Cube needs the fit kit # DK263. For kayak carriers the Yakima JayLow part # Y04073 is...
  view full answer...
• Rhino Rack Aero Bar Roof Rack Availability for 2015 Toyota Prius
  We have a black Rhino Rack roof rack that fits your 2015 Toyota Prius with the part numbers # RRVA118B-2, # RRRLKVA, and # DK195 but if you were wanting the flush bar style of rack where the bars don't extend out past the feet of the rack then the best option is the silver part # RRRS490 you mentioned.
  view full answer...
• Roof Rack Tracks & Basket That is Heavy Duty
  Hi Morris, While there isn't anything specific to your 2022 Roxor, there are rivet-mounted tracks you can add. I'm not sure the length you need, but the shortest available is the 36-1/4" long Rhino-Rack RT-Style Roof Rack Tracks # RRRTS540. Then you'd need a roof rack that fits the tracks, and for that you would add the Rhino-Rack Quick Mount Legs # RRRLT600. To complete the rack set up you'd need crossbars, with the right length depending on the width of your roof/cab enclosure. You...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2016 Kia Forte
  The Rhino Rack roof rack part numbers # RRVA118B-2, # RRRLKVA, and # DK401 is a confirmed fit for your 2016 Kia Forte and would be a great rack for a foldable kayak carrier like the Yakima JayLow part # Y04073 which is a J-style rack that can fold down when not in use.
  view full answer...
• Will a Nautic Stack Kayak Roof Rack Work w/ a Yakima Skybox on the Same Roof Rack?
  Hey Ariele, welcome back! That set up should work but it's going to depend entirely on how big the bottom of your kayak is. You'll need to push your Skybox over as far as you possibly can to give yourself enough room to mount the Rhino-Rack Nautic Stack Kayak Roof Rack w/ Tie-Downs item # RRS520 and your kayak. Please note your Rhino-Rack Vortex Aero Crossbars like item # RRVA118B-2 have a 165 lbs weight capacity so you definitely want to avoid overloading them. You may also want to check...
  view full answer...
• Is The Thule Force XT XXL Rooftop Cargo Box Compatible With Rhino-Rack Roof Rack Platform?
  It sounds like you want to attach a Rhino-Rack Pioneer Roof Rack Platform # RR42115BF to your Rhino-Rack Roof Rack # RRVA118B-2, # RRRCL4 and # RRRCP48-BK on your 2018 Mazda CX-5. To attach a Thule Force XT XXL Rooftop Cargo Box # TH6359B to the platform you will need a set of Accessory Bars # RR33AP since the clamps on the base of the box need to clamp around a bar and will not attach to the platform channels.
  view full answer...
• How To Convert Yakima Bike Rack From Round Crossbars To Aero Crossbars
  Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part # Y03590 would replace the Yakima SnapAround Mounting Brackets part # Y8810135 so that you can use your Yakima bike rack with the Rhino-Rack Vortex Aero Crossbars like part # RRVA118B-2.
  view full answer...
• Recommended Roof Rack for a 2023 Mazda CX-5 w/ a Naked Roof
  Yes, there is a roof rack that will fit your 2023 Mazda CX-5. This mounts directly to the side of your roof without drilling and has more than enough capacity for a bike rack. You will want the roof rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long - Qty 2 item # RRVA118B-2 RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points - Qty 4 item # RRRCL4 Custom RCP Fit Kit for 4 Rhino-Rack RC and...
  view full answer...
  
• How to Tell if Roof Cargo Box Will Fit with Roof Rack on a 2015 Honda Fit
  The Rhino-Rack roof rack for your 2015 Honda Fit consists of the following parts: 46" Vortex Aero Crossbars - # RRVA118B-2 2500 Series Legs - # RRRLKVA Fit Kit - # DK438 The instructions for the fit kit show that the middle of the front crossbar will be located 9-27/32" (a little under 9-7/8") in front of the center of the door jamb. If you measure from 9-27/32" in front of the center of your door jamb back to the line where your roof and hatch meets, and this is 47" or more the Yakima...
  view full answer...
  
• How Does Rhino-Rack Roof Rack Anchor to 2022 Mazda CX-5 with Bare Roof
  Thanks for reaching out! The Rhino-Rack roof rack for your 2022 Mazda CX-5 is a great selection that I know you'll be happy with, and it includes the parts you referenced: 46" Vortex Crossbars - # RRVA118B-2 RCL Legs - # RRRCL4 RCP Fit Kit - # RRRCP48-BK The fit kit you're talking about installs with bolts that mount to points under the channel trim on your roof right above your doors. You don't have to modify your roof but you will need to cutout some holes for the bolts to install...
  view full answer...
• Track Dimensions of the Rhino Rack Rooftop Track
  The channel on the Rhino Rack Roof Track, part # RRRTV148 is 0.86 inches (a little less than 7/8 inches) by 0.19 inches (a little less than 3/16ths inch). I've included a diagram showing these dimensions. The upper channel is about 5/8 inches wide.
  view full answer...
  
• Crossbars and Towers Compatible With Rhino-Rack RTC Roof Tracks on No Boundaries Trailer
  We have everything you need to complete the roof rack set up on your Forest River No Boundaries travel trailer, which according to my research has the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV148. Like you mentioned, all you need are the towers and crossbars: - Rhino-Rack Vortex Aero Crossbars - 71" Long # RRVA180B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 This will give you a complete roof rack on your No Boundaries trailer...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Will Thule Tracker II with TK1 Fit Kit Fit Rhino Rack RT Roof Rack Tracks
  Yes the Thule rack you mentioned that consists of TK1 fit kit and Tracker II feet will fit the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV148 that you referenced.
  view full answer...
• What Pneumatic Rivet Gun Do I Use to Install the Rhino-Rack RT Tracks?
  I confirmed with the engineers at Rhino-Rack that any standard rivet gun will work as long as the end attachment (the part that you place inside the Rhino-Rack RT Tracks # RRRTV148) is 1/2 inch x 1/2 inch. If you are looking for a complete crossbar system, I would be happy to suggest you compatible feet and crossbars if you provide the year/make/model of vehicle. That information will help me with determining the best crossbar length for you.
  view full answer...
• Can I Use the Rhino-Rack Aero Bar Rack # Y02-480B on a 1995 Ford Aerostar with No Headliner?
  Great question! Typically, we do not recommend using the Rhino-Rack Aero Bar Roof Rack # Y02-480B with vehicles with normal metal roofs because the bolts that drill into the roof actually protrude on the other side. The other end requires a nut that fastens the tracks to the roof. Technically, since you have a stripped metal roof, the rack would work great for you. However, if you plan to ever put a headliner on your 1995 Ford Aerostar, the headliner would have to cover that bolt/nut. If...
  view full answer...
• Do You Have Any Yakima Roof Tracks Available to Fir my Yakima Roof Rack?
  I have an alternate solution to the shipping time problem. I looked at the other sizes of Yakima rail systems, and they all will have about the same shipping time as the Yakima 54" Tracks for Roof Racks # RRRTV148 that you ordered. With that being said, another solution is to purchase the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 58" Long - Qty 2 # RRRTV148. However, this track is not compatible with your Yakima setup. If you choose to go this route, here is what you will need:...
  view full answer...
• Roof Rack Recommendations for a 1994 Toyota Previa
  If you do not mind drilling then I recommend a Rhino-Rack roof rack using Track Mount RLTF Legs # RLTF with leg adapters # RRVA-FK1-2, tracks # RRRTV148, and Vortex crossbars # RRVA126B-2. I have also included a link to the roof rack options we have for your Previa.
  view full answer...
• Availability of Longer Rhino-Rack Crossbars to Work with RT-Style Roof Rack Tracks
  The Rhino-Rack RT-Style Roof Rack Tracks # RRRTV148 that you referenced are compatible with a few different style mounting legs. For example, you can use the Track Mount RTC Legs # RRRLT600 with either the aero bars or the Rhino-Rack Heavy-Duty square bars using spacer # RRQMHD05. The aero-style bars from Rhino-Rack are available in lengths of up to 79 inches like with the Aluminum Aero Crossbar # RRVA200S. The Yakima towers will not be compatible with the Rhino-Rack tracks, but if...
  view full answer...
• Rhino Rack RT-Style Roof Rack Availability
  We do have the Rhino Rack track mount roof rack you are searching for. It is made up of three parts, the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV148, the Track Mount RLTP Legs # RLTP, and the Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1250B.
  view full answer...
• Will the Rhino-Rack RLTP Legs Fit on My Retrax XR Cover on My 2018 Ford F-150?
  I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall # RLTP-2 will not fit the Retrax XR rails. However, Rhino-Rack does make legs that are designed to fit the Retrax XR rails. Those are the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600. Sadly, with these legs, you will not...
  view full answer...
• Roof Rack for Winnebago Travato Class B Motorhome on 2017 Ram Promaster Chassis
  The Thule TracRac TracVan # TH29613XT roof rack is designed to work with 2 pairs of the existing roof rack mounts on a Ram ProMaster. If your Winnebago Travato has those existing connection points on the roof, the TracVan ES roof rack would work perfectly for you. I've linked to a diagram showing what the mounts look like, and where they can be found on the roof. From the online photos I've seen, it appears the exterior of the ProMaster is unchanged from the cargo model, so it's very likely...
  view full answer...
  
• Availability of Longer than 65 inch Rhino Rack Heavy Duty Roof Rack for ARE Camper Shell with Tracks
  Hey Jeff, yes 65 inches is the max length of HD crossbar for the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT that you referenced but we do have a solution with the 78 inch HD bars part # RRRB2000S-2 and the feet kit part # RLTP-2 and you'd have a 78 inch crossbar setup that fits your current ARE tracks.
  view full answer...
• Roof Rack System for ATC Truck Bed Caps
  According to my research, the ATC truck bed caps used Rhino-Rack RTC-Style Roof Rack Tracks like part # RTC16. Therefore, I recommend taking a look at the Heavy-Duty Crossbar System part # RLTP-2 and part # RB1500B-2. The heavy-duty cross bars have a 220 lb weight capacity which is far superior to other rooftop mounted crossbars. However, the increased weight capacity means the crossbar is physically bigger which limits the amount of available accessories that can be attached to them.
  view full answer...
  
• How To Install Rhino-Rack Pioneer Platform Rack on a 2010 Chevy Tahoe Hybrid
  In order to use the Rhino-Rack Pioneer Platform Rack on a 2010 Chevrolet Tahoe Hybrid you'd need to install a track system which I have listed for you below. Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 Rhino-Rack Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks part # RLTP-2 Rhino-Rack Quick Mount Leg Spacers part # RRQMPS10-4 Rhino-Rack Pioneer Platform Roof Tray part # RR42TB The tracks system will conform to the shape of the roof so there will be no issues...
  view full answer...
• Compatibility of Rhino-Rack Pioneer Platform on Pace Edwards Ultragroove Tonneau Covers
  The Pace Edwards UltraGroove Metal Hard Tonneau Cover - Retractable - Aluminum - Matte Black # 311-KMTA10A38 and the Pace Edwards UltraGroove Hard Tonneau Cover - Retractable - Aluminum - Matte Black # 311-KRTA10A38 will allow you to install a Rhino-Rack system. I recommend the Track Mount RLCP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 4 # RLTP-2 along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 71" Long - Qty 2 # RB1800B-2. Then you can...
  view full answer...
• Roof Rack Recommendation for a 2007 Chevy Trailblazer for Carrying Ladders
  I would recommend going with the Rhino Rack HD crossbar roof rack as it will have plenty of strength for your ladders. You would need the part numbers # RB1250B-2, # RLTP-2, and # RRVA-FK2-2 which have been confirmed as a fit for your 2007 Chevy Trailblazer raised side rails.. For load stops for the ladders you would then want the part # RRRLH. For 10 foot cinch straps you could also use the part # RTD3. Be sure not to exceed the roof weight capacity of your vehicle.
  view full answer...
• Crossbar Recommendation for Factory Tracks Spaced 96" Apart on Lance 850 Camper
  It sounds like you have factory tracks on your Lance 850 camper. While you are correct that those quick mount legs # RRRLT600 or the # RLTP-2 fit the tracks, we do not have any long enough crossbars to accommodate tracks that are 96" apart. the only other solution is to purchase new tracks to mount between the ones you currently have or to remove the ones you have and bring them closer together. For the solution for purchasing all new tracks with the crossbars, I recommend the Rhino-Rack...
  view full answer...
• What Accessories Are Designed to Fit the Rhino Rack Roof Rack Tracks # RRRTV188
  The Rhino Rack tracks part # RRRTV188 that you referenced was designed to have Rhino Rack roof racks installed in them like with the part numbers # RLTP-2 for feet and then part # RB1375S for a single HD crossbar.
  view full answer...
• Recommended Roof Rack And Kayak Carrier For 2011 Honda Odyssey With Naked Roof
  I have attached a link to all of the roof racks we offer that are designed to fit the roof of your 2011 Odyssey. Each of these roof racks require drilling into the roof of the vehicle so tracks can be mounted. I recommend the Rhino-Rack Vortex Roof Rack for your Odyssey. This roof rack has aerodynamic silver crossbars that help reduce wind drag and noise. The roof rack has a 165-lb weight capacity which can handle your 104-lb kayak. To order this roof rack you need part # RRVA137B-2,...
  view full answer...
• Roof Rack and Cargo Box with Largest Capacity for a 2014 Honda Odyssey
  For your 2014 Honda Odyssey, if it has the factory side rails I recommend the Thule AeroBlade Edge # TH7503-TH7504. This is an aerodynamic roof rack that is quiet and has lower drag than square or round bar systems. It is also made of aluminum so it is light weight and corrosion resistant. It is also available in black, # TH7503B-TH7504B. Or for a more budget-friendly option I recommend the Inno square bar roof rack # INB137 for the bars and # INFR for the feet. If the van does not have...
  view full answer...
• Parts Needed To Install The Rhino-Rack Sunseeker Awning On A Rhino-Rack RTC Roof Rack Track
  I spoke with Rhino-Rack and their tech stated they only recommend installing the Rhino-Rack Sunseeker Awning # RR32132 into a crossbar and have not tested it in the c-channel of the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 # RTC16 as they are slightly larger than their crossbar c-channels. For this I recommend the Track Mount RLTP Legs # RLTP-2 and the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2 # RRVA180B-2. The # RLTP-2 legs...
  view full answer...
• Installing 60" x 56" Rhino-Rack Pioneer Platform with Legs on a 2019 Silverado 1500 Crew Cab
  While we do have an option for you, the correct platform and backbone that is engineered to fit your 2019 Silverado 1500 Crew Cab is the # RR28ZW. The 42113B is unfortunately not confirmed to fit. With that being said, without using the Backbone, the only way to install just the platform # RR72TB with legs is with drilling a track system directly onto your cab. For this route, you need the following parts: - Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 - Track Mount RLTP Legs for Rhino-Rack...
  view full answer...
• Is the Rhino Rack RRRTS530 Track System a Fit on 2008 Saturn Aura
  The Rhino-Rack RT-Style Roof Rack Tracks # RRRTS530 are a universal track system that can be mounted on any vehicle with a naked roof. These tracks are 43-5/16" long, so you'll want to make sure that you have at least that much space length-wise on the roof of your 2008 Saturn Aura in order to make sure they'll fit. These tracks are compatible with the # RLTP-2 , # RLTF , # RLT500-2 and # RRRLT600 Rhino Rack foot packs. You will also need cross bars to complete your roof rack kit. If you...
  view full answer...
• How To Mount Rhino Rack Heavy Duty Cross Bars On A 2002 VW Eurovan
  There is not a compatible foot to mount the Rhino Rack heavy duty bars to your 2002 VW Eurovan. Since it is a naked roof you would have to mount a channel mount Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 Item # RTC16 to the roof and use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 4 Item # RLTP-2 to mount your heavy duty bars. Installing the tracks do require drilling holes into the roof for the hardware.
  view full answer...
• What Length Rhino Rack Roof Rack Crossbars Fit 2006 Jeep Wrangler
  Thank you for noting the different roof rack fit information between our site and the Rhino-Rack site. I checked with my technical contact at Rhino-Rack and it was confirmed that you are in fact correct - 59-inch crossbars are indeed specified for your 2006 Wrangler. We will be updating our fit information - thanks again for your keen eye. The 49-inch Vortex bar rack we specify - consisting of parts # RRVA126B-2, # RLTP-2 and # RTC12JW - does fit your Wrangler but the 59-inch Vortex bars...
  view full answer...
• Will Rooftop Bike Carrier, # S64720, Fit on a 1998 Ford Expedition
  The Rooftop Bike Carrier, # S64720, will fit on Thule, Yakima, and most factory roof rack load bars that run side to side on the top of the vehicle. If you do not have a factory roof rack you can add a roof rack system to your 1998 Ford Expedition if it is an EL model and has side rails that run front to back. You can use the Rhino-Rack roof rack, # RRVA118S-2 and # RRSX100. If it is not an EL model and has factory tracks that run front to back, use # RB1375, and leg set # RLTP-2. With...
  view full answer...
• Differences Between Rhino-Rack Pioner Platform Racks for a 2014 Ford E-350
  Hey Tom, thanks for reaching out! The Rhino-Rack Pioneer Platform Roof Tray # RR82TB is just the tray while the Rhino-Rack Pioneer Platform Rack - Gutter Mount # RR43QX is the same platform rack, but it also comes with 8 count of both the RLTP Leg Adapters # RRVA-FK1 and the Gutter Mounts # RL150S10. The second part number gives you the complete roof rack that can be mounted to your 2014 Ford E-350 so you'll want to go with that.
  view full answer...
• Difference Between Rhino-Rack Roof Rack Legs RL210DS8 and RL210S2
  The Rhino-Rack Roof Rack Legs for Land Rover Defender # RL210DS8 are a specific fit for the Land Rover Defender while the Rhino-Rack Roof Rack Legs # RL210S2 are more of a universal fit. With that being said, we will want to make sure everything you get is confirmed as a fit for your vehicle so if you could let me know your year/make/model I can help you find the best kit for your vehicle. The RLTP Leg Adapters # RRVA-FK1 are the adapters that you would use for either leg kit mentioned...
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• What is the Weight Capacity of the Rhino-Rack Gutter Mount System on a 2021 Jeep Wrangler Unlimited?
  I have a solution for you. Unfortunately, the Rhino-Rack Roof Rack Legs - Gutter Mount - 8-3/10" Tall - Qty 2 # RL210S2 will not fit your 2021 Jeep Wrangler Unlimited. The gutter mounts you need are two sets of the Rhino-Rack Roof Rack Legs - Gutter Mount - Qty 2 # RRRL110S5. The weight capacity of the gutter mount crossbar system on your 2021 Jeep Wrangler is 88 pounds. If you want to complete your roof rack system on your vehicle, you will need two sets of RLTP Leg Adapters for Rhino-Rack...
  view full answer...
• Recommended Roof Rack For 1996 Mitsubishi Delica L300 High Roof Van
  I checked with Rhino-Rack and the correct roof rack for your 1996 Mitsubishi Delica Van is as follows: -Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" # RRVA137B-2 -Rhino Rack Gutter Mounted Legs - 8-3/10" Tall # RL210S2 -Track-Mounted Leg Adapters # RRVA-FK1
  view full answer...
• Do the Rhino Rack Legs # RL210S2 Work with Vortex Aero Crossbars?
  Yes! The Rhino-Rack Rhino-Rack Roof Rack Legs - Gutter Mount - 8-1/4" Tall - Qty 2 # RL210S2 do fit Rhino-Rack Vortex Aero Crossbars like the # RRVA150B-2. In order to fit the crossbars to the gutter mounts, you need the adapter # RRVA-FK1. It is important to note that these components are designed to be used with the Artificial Gutter Mounts # 739AHALF, which require drilling into your vehicle. If you are looking for a 2-bar crossbar system, you need to purchase 2 of the # RRVA-FK1 and...
  view full answer...
• How To Use Rhino-Rack Vortex Aero Crossbars with Rhino-Rack Gutter Mount Legs On a 2011 Ford Van
  In order to install the Rhino-Rack Vortex Aero Crossbars part # RRVA180B-2 on your Rhino-Rack Roof Rack Legs part # RL150S10 you will also need to use the RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars part # RRVA-FK1.
  view full answer...
• Putting Rhino-Rack Platform Rack on Gutter Mounted Legs
  Hi Daniel, To put the Rhino-Rack Pioneer Platform Roof Tray # RR32TB onto Rhino-Rack gutter mount legs you'll just need the Leg Adapters # RRVA-FK1. These come in a package of two adapters so you'll need a quantity of two if you're mounting the tray to four of the legs.
  view full answer...
• No Drilling Needed to Install Rhino Rack Roof Rack on 2021 Ford Transit T350
  The Rhino Rack Four Crossbar Kit with parts # RRVA180S-4, # RRRLTPFC-4, # RRVA-FK1-4 does not involve drilling to install into the fixed mounting points on your 2021 Ford Transit T350. They do come with bolts, but those go into your mounting points on your roof. For vehicles without those mounting points, we also have tracks that can be drilled into the roof and then use the same roof rack kit afterwards. You might have seen instruction for those tracks. If you want to add a fifth crossbar...
  view full answer...
• Rhino-Rack Pioneer Platform Rack for 2019 Chevy Express
  I checked with Rhino-Rack, and there actually is a Rhino-Rack Pioneer rack for your 2019 Chevy Express Van, though it is a different size, and doesn't use the Backbone system to mount to your van. I confirmed with Rhino-Rack what you will need in order to add the Pioneer, which are the following parts: - Rhino-Rack Pioneer Platform Roof Tray - 100" Long x 62" Wide # RR82TB - Rhino-Rack Roof Rack Legs - Gutter Mount # RRRL150GMC (A quantity of four pairs of these) - RLTP Leg Adapters...
  view full answer...
• Add Another Rhino-Rack Crossbar to Your Existing Crossbar Set on Your 2015 Ford Transit T350
  Yes, it is possible to buy just one of the Rhino-Rack bar, leg set, and leg adapter set to add to your 2015 Ford Transit T350's configuration. For the Vortex Aero Bar, use part # RRVA180S for the single one. If you happened to have the Heavy Duty Square Bars instead of the Vortex Aero, you can use part # RB1800S for its single one. For the RLTP Legs, use part # RRRLTPFC for the single set. For the RLTP Leg Adapters, use part # RRVA-FK1 for the single set. I've linked to a video installation...
  view full answer...

Do you have a question about this Roof Rack?